OCONNOR 1030D RENTAL OConnor Ultimate 1030D and 1030Ds...
SACHTLER CINE 30
SACHTLER CINE 30 RENTAL
Sachtler Cine 30 hire. The Sachtler Cine 30 fluid head is a reliable and flexible solution for any film or television camera. It offers a recommended load of 3 to 35 kg. Its Snap & Go mechanism offers ease of mounting and dismounting the camera from the tripod. It has a weight of 6.7 kg. Used with a 150 mm ball or mitchell plate.
- Range: Cine
- Payload: 3 to 35 kg
- Bowl size: 150 mm
- Spreader type: Ground spreader
- Material: Aluminium
- Transport length: 1.23 m
- Tripod stages: 2
- Height with spreader: 1.05 to 1.95 m
- Weight: 6.70 kg
- Temperature range: -40 to 60 °C
- Tilt range: 90° to -75°
- Sliding range: 150 mm
- Interface Compatibility: Sideload
- Counterbalance: 18 counterbalance steps + Boost Button
- Drag: 7 + 0 horizontal and vertical grades of drag
SACHTLER CINE 30 HD HIRE
RENT SACHTLER CINE 30 FLUID HEAD
Sachtler Cine 30 HD fluid head rental. The sachtler cine 30 HD fluid head rental is made of carbon fiber, has the Cine 150 long tripod, floor spacer and canopy. Whether you work in the studio or on location, you need a fluid head that allows you to work quickly and efficiently. The Sachtler Cine 30 HD rental is a reliable and flexible solution for everyday film and HD use. Thanks to the Snap & Go side-loading mechanism, heavy camera packages can be mounted quickly without compromising safety and allowing the plate to slide to adjust the balance. This makes it quick and easy to set up a shot, no matter how many accessories are weighing down your camera.
The Sachtler Cine 30 fluid head rental features two payload ranges, 3 to 30 kg and 8 to 35 kg, for optimum versatility. Once balanced, the 18-step counterweight ensures that your camera will always be securely attached and will not suffer any unforeseen tipping. Frictionless, leak-proof fluid damping with seven levels of drag for smooth panning also means your tilts and panning are always smooth.
If you're using expensive cameras or working on an ambitious film or HD project with a busy schedule, you need a tripod that can keep up. The rental legs of the Sachtler Cine 150 Long tripod give you reliable high performance, even with payloads of 140 kg. The aluminum construction allows you to always be sure that it is completely stable, while you can secure the tripod firmly in place when using heavier loads.
This stability is accompanied by simplicity in the Sachtler Cine 30 HD rental system, as the Sachtler Cine 150 Long tripod legs are always quick and easy to use. The extra long swivel plate clamps make height adjustment no longer difficult in cold conditions or with gloves. The ergonomic design means you don't have to spend your time fiddling around awkwardly, and can spend more time being creative.
Sachtler Cine 30 fluid head
Sachtler Cine 30 HD Rental is a fluid head with a 150 mm half ball and integrated flat base that allows you to use this head with a tripod with a 150 mm ball base or flat base. Sachtler Cinema Rental 30 features a side-loading sliding camera plate mechanism. Unlike traditional sliding baseplates that require you to slide the camera plate onto the head, the side-loading mechanism allows you to snap the camera onto the head, yet slide the plate back and forth to adjust the balance of the camera on the head. This is especially useful when the camera is loaded with accessories. It is compatible with Arri and OConnor camera plates, and features a fine adjustment for a firm and secure fit.
The Sachtler Cine 30 rental head has two selectable payload ranges, from 6.6 to 66, and 17.6 to 77 pounds (34.93 kg). The head features 18 counterweight steps, selectable via the 9-step adjustment dial, with the half-step lever providing an additional 9 counterweight steps. Pan and tilt drag is governed by a similar 7-step (plus zero) indexed selection system along with Sachtler's patented leak-proof frictionless cartridges implemented on the Sachtler cine30 rental. A tilt safety lock ensures payload integrity until it is secured, and disc brakes ensure reliable locking of horizontal and vertical movement during operation with a quick turn of a short-travel lever.
These are some of the most important details of the Sachtler Cine 30 HD fluid head rental:
- Sachtler side-loading snap mount for camera rentals. The Snap&Go side-loading mechanism allows you to quickly mount heavy camera rental packages without compromising safety or sliding range.
- Sachtler 18-step counterweight and 7-step drag for quick setup and repeatable results.
- Payload range selector. Switch between high and low ranges by simply turning the front lever of the payload range selector.
- Illuminated bubble level. The Touch Bubble is a touch-activated, self-luminous bubble level powered by three batteries.
Sachtler Cine 30 Tripod System
The Sachtler Cine30 tripod system consists of the Cine 30 HD 150 mm fluid head, the Cine 150 long tripod, the Cine ground level spreader, the heavy-duty front pan bar and the side-loading camera plate, all of which are available for rental.
Any camera assistant will appreciate the rental of the Sachtler Cine30 HD 150 mm Cine30 HD head and its unique side-loading sliding plate. With the camera fully equipped, mounting and dismounting using the sachtler Cine30 fluid head's Snap & Go locking mechanism is safe, efficient and worry-free. Fully compatible with Arri and OConnor camera plate rentals, it features fine adjustment for a secure and firm fit, even if the plate is worn from use. Counterbalancing is achieved with an 18-step selector dial and a high/low range lever for quick, yet fine-tuned and repeatable settings. The horizontal and vertical drag of the Sachtler Cine30 rental tripod system is governed by a similar 7-step (plus zero) indexed selector system along with Sachtler's patented leak-proof frictionless cartridges. A tilt safety lock ensures payload integrity until it is secured, and caliper disc brakes ensure reliable pan and tilt locking during operation with a quick turn of a short-travel lever.
The Sachtler Cine30 tripod and fluid head system rental is taken into account when shooting a project with high-end cameras and production equipment, and a support system is needed that provides secure and robust stability in all conditions. With the Cine 150 (long), you get a tripod with an amazing 140.16 kg (309 lb) load capacity. Sachtler Cine30 rental safely supports the payload using reliable and proven aluminum alloy with dual 35 mm leg tubes. Clamps included in the oversized turntable rental facilitate gloved height adjustments, and the 150 mm cast receiver accommodates most cine/EFP heads.
Specifications Sachtler cine 30
- Cine Range
- Pan bar count 0
- Payload from 3 to 35 kg
- Fluid head ball size in rental 150 mm
- Weight 6.70 kg
- Soil spreader
- Material Aluminum
- Transport length 1.23 m
- 2-stage rental tripod
- Height with spreader 1.05 to 1.95 m (4 to 6 ft)
- Temperature range -40 to 60 °C
- Rental fluid head inclination range 90° to -75
- Sliding range 150 mm
- Interface Compatibility Side loading
- Counterbalance 18 counterbalance steps + Boost button
- Drag 7 + 0 degrees horizontal and vertical drag
Features Sachtler Cine 30
- Reliable and flexible solution for film and HD rental and daily use.
- Snap & Go side-loading rental fluid head mechanism
- The rental fluid head has two payload ranges, 3 to 30 kg and 8 to 35 kg, for optimal versatility.
- Sachtler cine30 HD rental counterweight of 18 pitches
- Frictionless, leak-proof cushioning with seven levels of drag