With the Arri LED L7-C source series, a new line of high-performance LED light begins. The Fresnel LED sources of the L7-c series can be connected to alternating current, it supports a voltage between 100 and 250VAC, with 50-60Hz frequency. It gets the same power as a tungsten up to 1000W but with much less consumption (160W | 220W). This model of the l series cannot be powered by batteries. L7-c can be controlled both by DMX and wirelessly by RDM command. The control panel with an easily manageable interface.
Arri led L5-C fresnel source rental. It went on the market in search of versatility and lightness in the shootings, not exceeding 7Kg. The L5-C fresnel sources can be connected by alternating current by TRUE1 with a power range of 90ACV to 250VAC, with a frequency of 50 / 60Hz. It has consumption of no more than 115W. The L5-c series can be powered by batteries connected to a V-Lock battery adapter by XLR-4pin cable, with a voltage range of 23V-36V. They can be controlled remotely by RDM commands or by controller to 5-pin DMX connection.