This store uses cookies and other technologies so that we can improve your experience on our sites. close
VEO 340S View larger

VEO 340S


Phantom VEO 340s

The Phantom VEO 340 high-speed digital cameras can be found in 2 available models, the VEO 340L model and the VEO 340-S model. The first model is used for the area of research and the S model for film and advertising thanks to its 35mm sensor and 2.5k resolutions. Storage option with C-Fast. Lightweight camera of only 2.5Kg.

  • Sensor: CMOS 25.6mm x 16.0mm
  • Resolution: Up to 2.5K (2560 x 1600 pixels)
  • RAM: 72 GB
  • High Speed: 800fps | 2.5K
  • Sensitivity: ISO Monochrome 6400D | 1250D color
  • Latitude: 10 stops
  • Weight: 2.5Kg

More details

750,00 €

Customer ratings and reviews

Nobody has posted a review yet

More info

VEO 340s Rental

The entire range of VEO cameras has 2 models; L and S. The L model is made for traditional capture on software and motion analysis. We choose the S model to be able to take advantage of the additional signals that it provides us as well as the recording mode without cable connection. It gives us the possibility of storage on C-Fast 2.0 cards. It is designed to withstand temperatures from 10 degrees to 50 degrees.

The VEO 340 Camera has a CMOS 35mm sensor of 25.6mm x 16mm, 30.2mm diagonal, with a depth of 12 bit and a dynamic range of 10 stops. 4 Megapixel camera with more than 3 gigapixels / s of data transfer. With the maximum capacity configuration (72HB of RAM), it is capable of capturing more than 15 seconds at speeds of 800fps. The shutter of the VEO 340 camera is the global shutter type.

Both models have 3G HD-SDI, HDMI, VF outputs. It can support up to 30 G and without the option of internal mechanical shutter, it supports up to 100 G.

Specifications and features

The VEO 340S camera at a resolution of 2500x1600 allows us to record at 800fps occupying 15 seconds in 72 GB, and so at lower resolution, we increase the amount of frames per second that we can capture. At resolutions of 1920 x 1080 it manages to capture up to 1500 fps in 17 seconds and in 1280 x 720 it manages to capture up to 3,300 fps in 17 seconds. Finally its lowest resolution (128x4) reaches up to 300,000fps. It will take 5 minutes to be captured and it has a minimum frame rate of 24fps.

Minimum exposure availability of 1 microsecond thanks to the global electronic shutter. Extreme dynamic range (EDR) with auto exposure function.


The Phantom VEO 340S Camera allows you to carry out any type of project, it offers the possibility of two different workflows. The first one is usually done with high-speed Phantom cameras and captures in internal high-speed RAM memory of 18GB, 36GB and 72GB. The second workflow mode goes through capture using removable C.Fast 2.0 cards, which have a maximum capacity up to 256GB.

Workflow with C.Fast 2.0 Cards

When Vision Research decided to launch the Phantom VEO high-speed camera series, there was only one workflow mode to be carried out with Phantom cameras. Also, there is a need for cable connection to a computer, as well as CINEMAG recording media. With the beginning of the incorporation of the VEO series into the film and advertising market, we obtain a workflow alternative (capturing on C.Fast 2.0 cards).

With this capture mode, the RAW Cinema files are first recorded in the internal RAM. Once captured, the clip can be played, trimmed and saved as necessary on the C.Fast card. Once the card is stored on a non-volatile disk, the card is again free.

Use the standard C.Fast card, and it must be formatted with the NFTS file system. With this alternative, data can be transferred between the camera's internal RAM to the card at a speed of 90MB / s.


It has a 3G HD-SDI rear port on S. models and provides the following Video signals:

  • 720p 50, 59.97, 60
  • 1080i 25, 29.97, 30
  • 1080psf 23,976, 24, 25, 29.97, 30
  • 1080p 23.976, 24, 25, 29.97, 30, 50, 59.97, 60
10 GB Ethernet for control and downloads. Fixed trigger and Timecode in the ports. It allows the ability to assign and define the parameters of several signals including Strobe, Event, F-Sync, Pre-trigger, Memgate, Time-code out, Ready, Aux trigger and Auto-trigger.
Time code
IRIG in / out SMPTE and MISP.
The internal RAM is shared in up to 63 parts and performs the rapid capture one after another, a power of 72GB which guarantees that we will not have lost frames.
Internal mechanical shutter
The shutter closes quickly to make a black reference or to protect the sensor while changing the lens. You do not need physical access to the camera.
Interchangeable Mount frames
Supports for Nikkon F / G, Canon EF with electronic aperture and focus control, 35 mm PL and C mount.
Phantom Camera Control (PCC) software is used for complete camera setup, download and includes tracking and motion analysis, and processes images.
File formats
The native Phantom file format is CINEMA (RAW). These files can be converted to other formats such as:
  • H.264 mp4
  • Apple
  • AVI
  • TIFF
  • Uncompressed QuickTime
  • JPEG
  • RAW
  • DNG
  • And several more formats using PCC software

7 other products in the same category


Be the first to write your review !