SCORPIO 30+7 RENTAL Telescopic crane rental Scorpio 30+7. Our...
SCORPIO 23' RENTAL
The SCORPIO 23 is a very versatile telescopic crane that stands out for its fluidity and smooth operation, for the effectiveness of its movement, thanks to the compensation system, the possibility of programming limit, speed and damping, and for its intelligent construction and the size of the spaces in which it can operate. Its maximum extension is 7.10 meters, with a range of movement range of 5.60 meters. Its minimum width of 73 cm allows it to fit through tight doorways as narrow as 80 cm and requires only 3.5 meters to deploy.
- Camera Max height: 6,7 meters
- Telescopic arm range: 5,60 meters
- Max / Min arm extension: 7,10 meters
- Min arm extension: 1,50 meters
- Max weight with weights: 1.100 kg
- Crane weight: 600 kg
- Transport: 6.000 kg Truck
SCORPIO 23' HIRE - RENTAL
SCORPIO 23' TELESCOPIC CRANE RENTAL - HIRE
This Telescopic Crane can vary the length of its arm from 1.50 to 7.10 meters. With a maximum shaft height of 6.70 meters. It has travelling wheels and pneumatic wheels. The travelling wheels of this crane are adjustable to standard track widths of 62 cm and 100 cm. The pneumatic wheels are adjustable in width from 73.5 cm to 144 cm. The Scorpio 23 is made of aluminum, which translates into a significant weight reduction that allows both transport and smooth operation with the consequent time savings.
This telescopic crane allows the head to be mounted in Under-slung configuration with a maximum load of 70kg while in Over-slung it allows a maximum load of 45kg. It has upper and lower guide wheels that provide it with agility and movement capacity that stand out for its smoothness, in addition to simplifying tension adjustments and doubling the safety of operation. Its speed is adjustable up to a maximum of 1.8 meters per second.
This telescopic crane requires 220V/16A or 110V/16A power. The power OUT for the hot head is 30V/20A while for the monitor it is 12V/3A. Due to its dimensions and weight, it needs to be transported in a 6000 kg truck.
MOTION CAPTURE FOR VIRTUAL STUDIOS - STYPE AND MO-SYS
The electronic configuration of the Scorpio 23 provides it with the possibility of programming sequential stops. The built-in screen reports the length of the arm, its vertical and horizontal angle, and the elevation of the optical axis, both in meters and feet. It has a system based on STYPE and MO-SYS that allows the reading of the Tilt, Pan, Arm and via encoder, essential to be able to export this metadata for Motion Capture works and its subsequent treatment in post-production