SCORPIO 30+7
€1,350.00
VAT excluded
SCORPIO 30+7 RENTAL
Telescopic crane rental Scorpio 30+7. Our comprehensive service with Scorpio 30+7. Includes all necessary technical material. Staff, machinist and Hot Head Operator with extensive experience in Cinema, Advertising and Television. We work throughout the Iberian Peninsula and include transport. This Telescopic Crane can vary the length of its arm up to 9 meters in 3 telescopic sections, and reaches 11 meters with the extension accessory.
- Camera Max height: 7,7 - 9,4 meters
- Telescopic arm range: 7 - 8,5 meters
- Max Arm extension: 9 - 11 meters
- Min Arm extension: 2,40 meters
- Mass WITh/WITHOUT Weights: 840 KG - 1.500 KG
- Transport: 6.000 KG Truck
Hurry up! Only
1
item(s) left in Stock!
SCORPIO 30+7 CRANE RENTAL
SCORPIO 30+7 TELESCOPIC CRANE HIRE - RENTAL
The Scorpio 30+7 is another magnificent telescopic crane, positioned between the Scorpio 23' and the Scorpio 45', allowing a great extension without needing all the requirements and number of operators necessary for the 45' version. It can vary its arm length from 2.25 to 11 meters. The 30' version can reach a maximum shaft height of 9.4 meters with the extension arm, while without this accessory it reaches 7.7 meters. It has a telescopic range of 8.5 meters in the 37' version while in the 30' it is reduced to 7 meters.
The Scorpio 30+7 allows mounting the camera head in Under-slung configuration with a maximum load of 70 KG without the extension accessory, while with it, the maximum weight is reduced to 45 KG. For both configurations, the maximum load on the Over-Slug is 30 KG. It has traveling wheels and pneumatic wheels. The traveling wheels of this crane are adjustable to standard track widths, from 62 cm and 100 cm. The pneumatic wheels are adjustable to widths of 73.5 CM and 144 CM.
It is equipped with an upper and lower wheel guidance system, that gives this crane agility and movement capacity that stands out for its smoothness, as well as simplifying tension adjustments and doubling the safety of operation. The Scorpio 30+7 allows you to precisely program the movement limits of the telescopic arm, sequential stops, the compensation of both horizontal and vertical automatic movement, and a precise adjustment of movement speed and stop damping.
As the rest of the models of this brand, it has an efficient noise reduction system both in arm movement and in movements over tracks and wheels that allow a silent operation. This telescopic crane requires a 220V/16A or 110V/16A power supply. It has 30V/20A power OUT for the hot head while it is 12V/3A for the monitor. Its mass without counterweights is 840 KG, while with them it reaches 1500 KG. For this reason, its transport requires a 6.000 kg truck.
MOTION CAPTURE FOR VIRTUAL STUDIOS - STYPE AND MO-SYS
This telescopic crane has a Tilt, Pan and Arm encoder reading system for Motion Capture and Augmented Reality work. It allows the capture of movements and the possibility of use for virtual studios for Film and TV. Through the STYPE and MO-SYS system, it captures the movements of the head, arm, and track.
