This store uses cookies and other technologies so that we can improve your experience on our sites. close
Close

TVLOGIC 17'' XVM-177A

New

TVLOGIC XVM-177A MONITOR

The TVlogic XVM-177A is a 17” HD (1920 x 1080) resolution monitor compatible with many video formats. It has BNC, HDMI, DVI connections, multiple colorspace presets with 3D LUT, backlight and gamma control.

  • Size: 16.5 ”(366 x 206mm)
  • Resolution: 1920 x 1080 (HD)
  • Color Depth: 1.07 B
  • Viewing angle: 178º
  • Contrast Ratio: 1400: 1
  • Luminance: 450 cd / m2
  • DC Voltage: 24v

More details

150,00 €

Customer ratings and reviews

Nobody has posted a review yet

More info

XVM-177A MONITOR RENTAL

tvlogic-video-monitor

TVLogic XVM-177A Rental. It is a 1 grade monitor. Tvlogic is designed for both studio and outdoors where precise color monitoring is required. The TVlogic XVM-177A 1 Grade Monitor works with 12-bit color processing.
Its advanced color calibration technology uses a high-end IPS LCD screen with a 1920 x 1080 resolution offering unmatched image quality.

tvlogic-monitor-rentalIn addition, the monitor has functions for shooting, reference and measurement such as: Focus Assist, markers, waveform, vectorscope, timecode, UMD, subtitles, presets with 3D LUTS, Backlight and range control and the possibility of importing 3D LUTs from third parties.

The Tvlogic XVM-177A Grade 1 monitor for shooting and editing features 1 composite BNC input / output, 3 BNC component inputs / outputs, 2 BNC 3G-SDI inputs / outputs, 1 HDMI input and 1 DVI input

The next-generation 1 grade IPS LCD (1920 x 1080) screen features 12-bit video processing and precise color calibration.

rent-tclogic-monitor

Featured modes - Monitor TVLOGIC XVM-177A:

Screen with audio level meter: It shows the level of the built-in sound signal along with the video signal input through the terminal, such as SDI or HDMI.

Blue mode only / Mono: The red and green channels are not used and only the blue or monochrome channel is used to display on the screen. This function is used to adjust the color tones of the screen using the SMPTE color bar.

Focus Assist Mode: It assigns a color to the pixels in the image limits to inform the user to achieve the best focus. With this function, the user can easily differentiate the focused area from the unfocused area, especially when shooting with shallow depth of field.

H / V Delay Mode: It allows you to check the suppression area and synchronize signals by showing the horizontal and vertical intervals in the center of the screen.

Key lock: It locks the configuration buttons.

Marker: It displays various types of aspect ratios on the screen. A wide range of markers and safety areas are available with line color selection and transparency. A user bookmark is available if any of the standard bookmarks meets your requirements.

Range error: It analyzes the Luma (Y ') and chroma information of the input signal (C') and if the input signal exceeds the designated minimum and maximum value, the pixel will flash. This function exists to help the user easily find any unwanted level of signals and for better exposure settings.

Several scanning modes: Controls the image size. Overscan: Additional area around the four edges of the image that the viewer cannot see reliably. Underscan: It restricts the image size so that the monitor shows everything the camera is seeing. 1: 1 pixel: it shows the resolution of the original image without scaling to match a certain resolution or aspect ratio.

Waveform / vector range mode: Waveform Y: it shows the Luma (Y '), Cb and Cr component of the waveform input signal. Vector range: it shows the 'B-Y' and 'R-Y' color components of the input signals on the XY axis.

Focus Mode: It magnifies the input signal from 0% to 90%.

PBP mode: It displays multiple entries on the screen at the same time.

1: 1 pixel mapping modes for SD / HD: It Displays the resolution of the original image without scaling to match a certain resolution or aspect ratio.

Custom 3D LUT import: It allows you to load your 3D-LUT files into NLE software such as Davinci Resolve via USB flash memory and displays your LUT in VFM-055A or F-7H. Once you synchronize the LUTs on the monitor, you will easily change them in production.

3G-SDI Level A / B: It supports 3G / SDI input Level A / B.

TVLOGIC XVM-177A Technical Specs:

  • Size: 16,5” (366 x 206 mm)
  • Resolution: 1920 x 1080
  • Pixel pitch: 0,137mm
  • Color depth: 1,07B
  • Viewing angle: 178º
  • Contrast rate: 1400:1
  • Brightness: 450 cd/m2
  • DC Voltage: 24v
  • Audio output: Analog stereo (phone jack)

7 other products in the same category

Reviews

Be the first to write your review !

Close