9" LVM-091W-M MONITOR

Display with audio level meter: It shows the level of the built-in sound signal along with the video signal input through the terminal, such as SDI or HDMI.

Blue mode only / Mono: The red and green channels are not used and only the blue or monochrome channel is used to display the screen. This function is used to adjust the color tones of the screen using the SMPTE color bar.

Focus Assist Mode: Assigns a color to the pixels in the image boundaries to inform the user to achieve the best focus. With this function, the user can easily differentiate the focused area from the unfocused area, especially when shooting with shallow depth of field.

H / V Delay Mode: Allows you to check the suppression area and synchronize signals showing the horizontal and vertical intervals in the center of the screen.

Key lock: Locks the configuration buttons.

Luma Zone Control (Y ') Mode: Displays the Luma (Y') level of the color input image. The Y 'of each pixel was analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen.

Marker: Displays various types of aspect ratios on the screen. A wide range of markers and safety areas are available with line color selection and curtain transparency.

Range error mode: Analyzes the Luma (Y ') and chroma information of the input signal (C') and if the input signal exceeds the designated minimum value and the maximum value, the pixel will flash. This function is to help the user easily find any unwanted level of signals and for better exposure settings.

Waveform / vector range mode: Waveform Y: shows the Luma (Y '), Cb, Cr component of the waveform input signal. Vector range: shows the color components 'B-Y' and 'R-Y' of the input signals on the XY axis.

User Custom Aspect Mode: Adjusts the display ratio Width / Height.

Focus Mode: Magnifies the input signal from 0% to 90%.