This store uses cookies and other technologies so that we can improve your experience on our sites. close
Close

WIRELESS FOLLOW FOCUS

WIRELESS FOLLOW FOCUS 

RENT WIRELESS FOLLOW FOCUS, IRIS AND ZOOM SYSTEMS

Wireless follow focus rental. We have several models, starting with the reliable controls of Arri WCU-4, with different configurations (UMC, CLM4, CForce) through Preston and Scorpio, to cheaper options like Bartech and Cinegears. Enjoy the wireless control and mapping offered by one of our contr...

RENT WIRELESS FOLLOW FOCUS, IRIS AND ZOOM SYSTEMS

Wireless follow focus rental. We have several models, starting with the reliable controls of Arri WCU-4, with different configurations (UMC, CLM4, CForce) through Preston and Scorpio, to cheaper options like Bartech and Cinegears. Enjoy the wireless control and mapping offered by one of our controls to always be aware and with your marks ready.

Which wireless follow focus are available?

The most innovative Arri electronic control system. For any camera or lens.

The Arri electronic control system is composed of sophisticated tool allowing the wireless control in any camera or lens. All the tools inside this modular system has been designed looking to the future and they can be freely combined to resolve different needs on camera configurations.

Manual units with ergonomic designs and a wealth of features that make an easier work for the focus-puller. The intelligent and compact motor lens controller help to optimize camera configurations.

Data lenses provide an easier work on set and on the post-production time. ARRI has assembled the most complete professional system of the market which is ready for any shooting challenge.

Arri WCU 4 Focus puller, Iris and Zoom

The wireless follow focus Arri WCU-4 can be set up with three motors. Working with Alexa SXT and Alexa XT Plus, the receiver is not needed, the signal goes directly to the camera. The FPS speed, shutter angle and exposure index can be changed. Also, it allows lens mapping, start to record and it receives the information of a Cinetape measure.

The camera configuration status can be transmitted to the WCU-4 at any time.

It works with Arri CLM4, Arri CForce Mini and Arri CForce Plus motors. The receivers to set it up are Arri AMC 1, Arri SMC 1 and UMC4.

Arri SXU 1 Follow focus

The Arri SXU-1 wireless focus puller allows one motor control. Focus, iris or zoom. It has a backlit LC-Display legible on any light condition.

It match with Arri CLM4, Arri Cforce Mini and Arri CForce Plus motors. It works with the receivers Arri AMC-1, Arri SMC 1 and UMC-4

Which motor controllers for Arri wireless follow focus exist and how they can be set up?

The Arri motor controllers offer to this electronic control system a total operating autonomy, allowing to manual wireless units and other accessories to work with all kind of lenses. From anamorphic lenses with high range PL mount to the zooms used on ENG shootings and from cameras like ARRI ALEXA 65 to any other camera from other manufacturers of the market.

The Universal Motor Controller UMC-4 is the today's most advanced controller. It offers to any camera the same feature than the Arri ALEXA Plus module. It can be connected up to three different manual units to operate focus, iris and zoom motors of any lens.

The Active Motor Controller AMC-1 is perfect for lightweight configurations. It makes Cforce mini motors compatible with any camera of other manufacturer or with ALEXA Mini using EF mount.

The Single Motor Controller SMC-1 controls one CLM motor and it is the perfect partner for the SXU-1 unit

Arri UMC-4 3 channels controller

Arri UMC-4 receiver can control focus, iris and zoom on any camera. It provides vital information about the lens for recording and VFX post-production.

The integrated Arri (LDS®) Lens Data System gives information all the time about focus, iris and zoom configurations allowing: to make a lenses mapping for marked focus rings, deep of field viewing in the wireless compact unit WCU-4 and focus tracking when it is set up for a continuous monitoring of the character inside the frame through the measuring device Arri UDM-1.

This Lens Data System includes information about timecode, pitch and roll helping to create hard visual effects in post-production.

It match with Arri WCU-4 and Arri SXU-1 follow focus.It works with Arri CLM4, Cforce Mini and Cforce plus motors.

Arri AMC-1 3 channels controller

The Arri AMC-1 is a wireless controller for focus, iris or zoom motors. It is connected through LBUS up to 3 Cforce motors.

The active motor controller Arri AMC-1 allows Cforce mini motors to match with any camera of other manufacturer or with ALEXA Mini using EF mount.

It is compatible with Arri WCU-4 and Arri SXU-1 follow focus. It only works with Cforce mini and Cforce plus motors.

Arri SMC-1 1 motor controller

The single motor controller SMC-1 has been designed for lightweight configurations used with Steadicam, Movi stabilizer, Ronin or Drones.

It only operates one motor and only matches with CLM4 motors. It is ideal to combine with Arri SXU-1

Which Arri motors exist and which controllers they match with?

Five motors offer different torque, speed and size options.

Fast and powerful, the CLM-3 is perfect for heavy lenses on hard situations of shooting.

The CLM-2 and CLM-4 works very good with standard lenses.

The CLM-5 is an extremely smart and lightweight motor designed for challenging set ups when using drones or gimbals.

The Cforce Mini or Plus with serial connections is a ideal option for the ALEXA Mini camera providing a lightweight and integrate solution

Arri CLM4 Motor

The CLM-4 is a quiet lenses motor to operate any standard lens in a soft way. The system offers several mounting options: rod to rod, Hill Bracket rosette and standard rod support.

The Arri CLM4 match with the Arri lenses controller UMC-4 and SMC-1.

It also works without a receiver and directly connected to Alexa Plus, Alexa SXT, Alexa 65, Arricam, Arri 435 and many other Arri cameras.

Arri Cforce Mini Motor

Smart and lightweight, the Cforce Mini is an intelligent motor ideal for optimized lightweight configurations.

The Arri Cforce lens motor are equipped with twins LBUS connectors and daisy chain connection technologie allowing to connect up to three motors.

Cforce motors connect to the new active motor controller AMC-1, making it to match with any camera in the market.

Arri Cforce Plus Motor

The Cforce Plus is strong enough to move the lens ring of any standard, vintage or zoom lens in a fast and soft way. The Cforce Plus has twins LBUS connectors allowing to connect up to three motors in line.

Apart from a directly connection with the ALEXA Mini, the Cforce Plus motors can be connected to the Arri motor controllers AMC-1 and UMC-4 for independent configurations. It is compatible with LBUS input Cmotion devices.

Arri UMD-1 Ultrasonic measure

The Arri Ultrasonic Distance Measure UMD-1, measures the distance between the sensor and the objects inside the frame in any camera. It has a sensor module and a display to configure the measure range limits.

The UMD-1 sensor module can be used without the display on ALEXA Plus, XT Plus, Studio, XT Studio, SXT Plus and 65 or using the universal motor controller UMC-4 where you can see it on the WCU-4.

The UMD-1 measures ease the focus tracking through the WCU-4 offering a fast way to focus the clapboard at the start of a clip.

ARRI

More
Showing 1 - 10 of 10 items
Showing 1 - 10 of 10 items
Close